The aquatherm® SHT System offers 4 different possibilities of connection from the riser to the floor distribution:

a) central PP-R manifold
b) PP-R adapter
c) transition pieces with male thread
d) Euroconus adapter 3/4'' nut

a) Branch to the PP-R manifold:

The central manifold is assembled by fusion welding with the following elements:

• aquatherm® SHT-ball valve (Art.-No. 78000)
• fusiotherm®-manifold end piece (Art.-No. 30804)
• fusiotherm®-end cap (Art.-No. 14112)

The distribution pipe has 4 branches, each for screwing in sliding sleeve connections (Art.-No. 78010 Ø 16 mm resp. 78012 Ø 20 mm) or blind plugs (Art.-No. 78020).

b) Branch via PP-R-adapter:

The aquatherm® SHT-adapter from PP-R and brass:

• Art.-No. 78300: 20/16 x 2.0 mm
• Art.-No. 78302: 20/20 x 2.0 mm
• Art.-No. 78304: 25/20 x 2.0 mm
• Art.-No. 78306: 25/25 x 2.3 mm
• Art.-No. 78308: 32/25 x 2.3 mm
• Art.-No. 78310: 32/32 x 2.9 mm
• Art.-No. 78312: 40/32 x 2.9 mm

c) Branch via male transition pieces:

The aquatherm® SHT-transition pieces

• Art.-No. 79202: 20 x 2.0 mm x 1/2" M
• Art.-No. 79203: 20 x 2.0 mm x 3/4" M
• Art.-No. 79204: 25 x 2.3 mm x 3/4" M
• Art.-No. 79205: 25 x 2.3 mm x 1/2" M
• Art.-No. 79206: 32 x 2.9 mm x 3/4" M
• Art.-No. 79208: 32 x 2.9 mm x 1" M
• Art.-No. 79207: 40 x 3,5 mm x 11/4" M

can be screwed in all commercial fittings with female
thread. This enables the transition of the aquatherm® SHT-system to all metallic and plastic pipe systems.

d) Branch via manifold with  euroconus:

The floor distribution can be realized even with all non-system connection manifolds with euroconus connections.

The SHT-euroconus adapter:
 

• Art.-No. 79220: 16 x 2.0 mm
• Art.-No. 79222: 20 x 2.0 mm

with 3/4" nut and sliding sleeve connection only have to be screwed in customary manifolds or screwed connections only.