In the field of surface heating aquatherm® offers through the development of the system element 30 an all-purpose surface heating system for lowest construction
thickness. It meets all requirements of old and new buildings – especially for refurbishments. Whether in dry or wet construction, all requirements of
an underfloor heating system can be covered. The extruded system plate with pre-fabricated pipe channels is suitable for every floor plan and each room layout.

Advantages

Lowest construction depth (e.g. 55 mm with dry floor, 60 mm with screed, 65 mm with floating floor) due to low plate thickness.
Interruptions in the progress of construction work areavoided.
The construction offers best conditions for a quick installation. Due to the low static weight, e.g. by using dry floor, floating floor or thin-layer cement, the system
is particularly suitable for wooden beam ceilings. Moreover the installation on existing floor coverings is possible, provided that they are even and sustainable.
The EPS- material is suitable for working loads up to 7.5 t, provided that the charge distribution layer, any additional insulation and the carrying sub-floor are modified
to suit.